-
-
Maxseal SUPER
MAXSEAL® SUPER is a special waterproofing coating made of a mixture of cements, carefully controlled aggregates and special organic and inorganic additives. Its special formula improves the osmotic effect of the application allowing the penetration in the concrete through its capillary system. The product crystallises inside sealing, waterproofing and protecting the concrete structure. It has been designed to be applied on fresh or cured concrete, pre-cast concrete, concrete blocks, cement plasters but also suitable on bricks and masonry.
-
Maxseal Flex Express
MAXSEAL® FLEX EXPRESS is a two-component flexible waterproofing mortar, based on liquid acrylic resins (Component A) and special cements, additives and well-graded aggregates (Component B), with very fast setting-time suitable for urgent waterproofing works.
Its very fast setting-time makes it the ideal product for waterproofing with sudden rainfalls, short-time curing for flooding tests, splash zone areas or tiling with ceramic after 2 hours drying-time.
-
Maxseal
MAXSEAL® is a cement-based mortar with special additives and controlled aggregates. Once cured, it becomes a suitable waterproof coating for use on concrete, brick, concrete block, mortar render and masonry substrates.
-
Maxseal Flex – M
MAXSEAL® FLEX-M is a one-component cementbased mortar. Once mixed only with water, it provides a high-performance flexible coating, for waterproofing and protection of concrete against positive and negative pressure.
-
Maxseal Flex
MAXSEAL® FLEX is a two-component product. Component A is a water-based special acrylic resin and component B, is a mortar based on a mixture of special cements, additives and well-graded aggregates.
Once applied and cured, MAXSEAL® FLEX provides a non-toxic, flexible and waterproof coating with very high adhesion on those common substrates in construction such as concrete, natural and artificial stone, traditional mortar plasters, bricks, concrete blocks, etc.
