-
Quick ViewMaxrite INJECTION
MAXRITE® INJECTION is a one-component and shrinkage-compensated mortar, formulated from cements and selected mineral products, modified with polymers and corrosion inhibitors. It comes in powder form, ready to use mixing only with water to achieve a high mechanical strength and adhesion, with excellent fluidity and nonsegregating mortar. Contains no chlorides or metallic particles. It is designed for structural repair, fillings and anchorages exposed to an aggressive environmental ambient, providing additional protection for steel reinforcement and metallic elements.
MAXRITE® INJECTION meets the requirements of R4 Class according to EN1504-3.
-
Quick ViewMaxrite FLOOR
MAXRITE® FLOOR is a one component fluid shrinkage-compensated mortar made of special cements, selected aggregates, and reinforced with both metal and polypropylene fibers. It is specially designed for structural concrete repair where high strength is required, strengthening of slabs at the top by increasing of compression layer, and for anchoring rods and rebars in concrete.
MAXRITE® FLOOR meets the requirements of R4 Class according to EN-1504-3 and the requirements for rebars anchoring according to EN1504-6.
-
Quick ViewMaxgrout INJECTION
MAXGROUT® INJECTION is a single component cement-based mortar with very fine mineral fillers. Once mixed with water, it is specially designed to be used for injection or grouting for filling of cavities in masonry walls and consolidating works.
-
Quick View
Maxgrout 200 EXPRESS
MAXGROUT® 200 EXPRESS is a onecomponent, quick-setting, non-shrink fluid mortar with high mechanical properties made of special cements, well-graded mineral products, special admixtures and reinforced with fibres. It is specially designed for fillings, anchorages, and concrete repairs in thickness up to 20 cm when a rapid return to service is required. It meets the requirements of class R4 according to European standard EN-1504-3 and EN 1504-6.
-
Quick ViewMaxgrout -HR
MAXGROUT®-HR is a one-component, nonshrink fluid mortar with high mechanical properties and formulated from special cements, well-graded mineral products and specials admixtures. It is a suitable product for fillings, anchorages and concrete repairs when a rapid return to service is required.
-
Quick ViewMaxgrout
MAXGROUT® is a one-component non-shrink mortar formulated from special cements and wellgraded mineral products which provides high mechanical properties and fluidity. Contains no chlorides or metal particles. It comes in powder form, ready to use mixing only with water. The product meets the requirements of R4 Class according to EN-1504-3 and the requirements for rebars anchoring according to EN 1504-6.
-
Quick ViewMaxepox FIX
MAXEPOX® FIX is a three-component fluid mortar formulated with solvent-free epoxy resins and well-graded mineral products, that provides high mechanical properties and fluidity. It is specially designed for anchoring bolts and filling voids by pouring.
MAXEPOX® FIX meets the requirements of R4 Class according to EN-1504-3 and the requirements for rebars anchoring according to EN-1504-6.
