-
-
-
Maxelastic -BA
MAXELASTIC® BA is a water-based anionic bitumen emulsion, chemically modified with elastomers suitable for direct pressure waterproofing and protection of concrete surfaces, asphalt, cement, fibber cement, porous ceramic, etc., with high adhesion to the substrate, providing an elastic and waterproof coating.
-
-
Maxepox TAR -F
MAXEPOX® TAR-F is a two-component, solvent-free, flexible and waterproof coating based on modified tar-epoxy, suitable for use on concrete and metal substrates.
-
-
Maxelastic POLY
MAXELASTIC ® POLY is a hot-applied, twocomponent, solvent-free, 100% pure polyurea of high reactivity suitable for waterproofing and protection of concrete.
Once applied, it provides a high performance continuous elastomeric membrane for waterproofing of roofs, terraces, bridge decks, underground structures, etc.
Suitable for the waterproofing of drinking-water reservoirs.
MAXELASTIC® POLY has certificates of European Technical Evaluation for use in waterproofing of roofs (ETAG 005) and waterproofing of bridge decks (ETAG 033).
-
Maxseal SUPER
MAXSEAL® SUPER is a special waterproofing coating made of a mixture of cements, carefully controlled aggregates and special organic and inorganic additives. Its special formula improves the osmotic effect of the application allowing the penetration in the concrete through its capillary system. The product crystallises inside sealing, waterproofing and protecting the concrete structure. It has been designed to be applied on fresh or cured concrete, pre-cast concrete, concrete blocks, cement plasters but also suitable on bricks and masonry.
-
Maxseal Foundation
MAXSEAL® FOUNDATION is a cement based product which, together with special additives and selected aggregates gives it waterproofing characteristics, whether the foundations are in concrete or masonry. It gives great protection to foundation concrete thanks to its high resistance to aggressive waters.
-
Maxseal Flex Express
MAXSEAL® FLEX EXPRESS is a two-component flexible waterproofing mortar, based on liquid acrylic resins (Component A) and special cements, additives and well-graded aggregates (Component B), with very fast setting-time suitable for urgent waterproofing works.
Its very fast setting-time makes it the ideal product for waterproofing with sudden rainfalls, short-time curing for flooding tests, splash zone areas or tiling with ceramic after 2 hours drying-time.
-
Maxseal
MAXSEAL® is a cement-based mortar with special additives and controlled aggregates. Once cured, it becomes a suitable waterproof coating for use on concrete, brick, concrete block, mortar render and masonry substrates.
-
Maxseal Flex – M
MAXSEAL® FLEX-M is a one-component cementbased mortar. Once mixed only with water, it provides a high-performance flexible coating, for waterproofing and protection of concrete against positive and negative pressure.
-
Maxseal Flex
MAXSEAL® FLEX is a two-component product. Component A is a water-based special acrylic resin and component B, is a mortar based on a mixture of special cements, additives and well-graded aggregates.
Once applied and cured, MAXSEAL® FLEX provides a non-toxic, flexible and waterproof coating with very high adhesion on those common substrates in construction such as concrete, natural and artificial stone, traditional mortar plasters, bricks, concrete blocks, etc.
