MAXURETHANE INJECTION MONO CAT
MAXURETHANE INJECTION MONO CAT is a single-component, solvent-free catalyst for the injectable polyurethane resin MAXURETHANE INJECTION MONO.
MAXURETHANE INJECTION MONO CAT controls the gel time of the polyurethane resin and is suitable for controlling high-pressure water ingress, capillary networks, very fine cracks and soil stabilisation. Its low viscosity ensures good and deep penetration into the substrate.
Applications
- Control of the gel time of polyurethane resin.
- Control of high-pressure water ingress.
- Applications in capillary networks and very fine cracks.
Advantages
- Ensures complete reaction of the injected resin.
- Increases the foam volume of the injected resin.
- Extends the pot life of the premixed product.
- Low viscosity ensures good and deep substrate penetration.
Application instructions
Mix MAXURETHANE INJECTION MONO CAT with the resin immediately before injection and keep all equipment dry to prevent premature reaction of the product. For further information or detailed technical data, consult the product Technical Bulletin.
Consumption
Consumption varies depending on the application, and an on-site trial is recommended to approximately determine the amount of product required. For further information or detailed technical data, consult the product Technical Bulletin.
Packaging
MAXURETHANE INJECTION MONO CAT is supplied separately to allow adjustment of the injectable polyurethane resin and provide a longer pot life before application. For further information or detailed technical data, consult the product Technical Bulletin.
Safety and health
Wear safety glasses, gloves and suitable clothing during injection. Ensure adequate ventilation of the work area and consult the Safety Data Sheet.
