MAXSEAL TRAFFIC

MAXSEAL TRAFFIC is a two-component mortar based on special cements and water-based synthetic resins, designed as a trafficable waterproof coating for concrete floors under hydrostatic pressure.

It combines waterproofing and mechanical resistance in a single product, suitable for both positive and negative pressure. MAXSEAL TRAFFIC provides excellent resistance to abrasion from cars, forklifts, and industrial vehicles, while allowing water vapor diffusion. Its strong adhesion on concrete requires no primer, and its final texture can be customized for aesthetic or anti-slip finishes. The solvent-free, non-toxic and odourless formulation makes it ideal for poorly ventilated or enclosed areas, ensuring safe and eco-friendly application.

Applications

• Waterproofing underground parking, garages, ramps, and areas with wheel traffic.
• Waterproofing concrete floors against rising damp in warehouses, factories, and residential slabs.
• Protection of basements, tunnels, and galleries under high water pressure and abrasion.
• Line marking and anti-slip finishing for zebra crossings and emergency areas.

Advantages

• Waterproof and abrasion-resistant in a single system.
• Resists positive and negative hydrostatic pressure.
• Highly durable against UV, chlorides, de-icing salts, and freeze-thaw cycles.
• Strong adhesion without primers or bonding agents.
• Solvent-free, odourless and suitable for interior applications.

Application method

Pour component A into a clean container and add component B gradually while mixing with a low-speed drill until a lump-free mix is achieved. Apply two coats by brush, broom, or spray.

Consumption

Total consumption: 2.0 – 3.0 kg/m² in two coats of 1.0 – 1.5 kg/m² each, depending on substrate porosity and texture.

Packaging

MAXSEAL TRAFFIC is supplied in 35 kg pre-weighed sets: 10 kg of liquid (component A) and 25 kg of powder (component B), available in grey or white.

Precautions and safety

Use rubber gloves, goggles, and protective clothing. Avoid skin and eye contact and do not inhale dust during application. Wash with water if contact occurs.