MAXSEAL FLEX
MAXSEAL FLEX is a two-component mortar designed for flexible waterproofing and protection of concrete, masonry, bricks and cement-based substrates, against both positive and negative water pressure.
Its formulation, based on special cements, additives and water-based acrylic resins, creates a seamless coating with excellent adhesion and crack-bridging capability. MAXSEAL FLEX resists pressure, freeze-thaw cycles, chloride attack and UV exposure. It allows substrate breathability, can be applied on damp surfaces, and is certified for contact with potable water. Ideal for demanding waterproofing in civil engineering, building renovation, water tanks, pools, bathrooms and terraces. Can be overcoated with tiles, adhesives or decorative mortars.
Applications
- Waterproofing of tanks, reservoirs, swimming pools and irrigation channels.
- Protection of basements, foundations, tunnels and retaining walls.
- Interior and exterior waterproofing under tiles in kitchens, bathrooms and balconies.
Advantages
- Flexible membrane with excellent crack-bridging ability.
- Withstands water pressure and aggressive environments.
- Vapour-permeable, non-toxic, chloride-free, suitable for drinking water.
- Excellent adhesion to damp surfaces without bonding agents.
- Easy application by brush, roller, trowel or spray equipment.
Application method
Pour component A into a clean container and gradually add component B while mixing at low speed until smooth and lump-free. Apply two crossed coats onto the damp substrate.
Consumption
Estimated consumption: 2.0 to 3.0 kg/m², applied in two coats of 1.0 to 1.5 kg/m² each, depending on substrate and method used.
Packaging
MAXSEAL FLEX is supplied in 7, 32 and 35 kg pre-measured sets, available in smooth or rough texture, in white, grey or other light colours on request.
Health and safety
Use gloves, safety goggles and protective clothing during preparation and application. Avoid contact with eyes and skin, and do not inhale dust.
