MAXFLOOR
MAXFLOOR is a two-component water-based epoxy coating designed for finishing and protecting floors and general surfaces in industrial and technical environments.
MAXFLOOR provides a continuous, durable coating suitable for concrete floors, cement mortars and metal substrates. MAXFLOOR is used as both a protective finish and as part of multi-layer systems, offering versatility in environments requiring resistance, cleanliness and compatibility with different substrates. Its water-based formulation allows application on slightly damp surfaces, making MAXFLOOR especially suitable for maintenance and refurbishment works.
Applications
- Protective and decorative coating for concrete floors and cement-based substrates.
- Coating for industrial facilities, warehouses, garages and service areas.
- Protection of steel, metal and polished surfaces.
- Primer for epoxy and polyurethane coating systems.
- Anti-dust finish for industrial and storage floors.
Advantages
- Excellent adhesion to concrete and steel substrates.
- High resistance to abrasion and mechanical wear.
- Applicable on substrates with residual moisture.
- Water-based formulation with very low odour.
- Easy cleaning and maintenance of coated surfaces.
Application method
Prepare the substrate ensuring it is clean, sound and free of contaminants. Mix components until a homogeneous product is obtained and apply using roller, brush or spray equipment, ensuring even coverage across the surface. For further information or detailed technical data, please refer to the product technical data sheet.
Consumption
Consumption will depend on substrate porosity, texture and condition, as well as the application method used and specific site conditions, which may influence the final material usage. For further information or detailed technical data, please refer to the product technical data sheet.
Packaging
MAXFLOOR is supplied in pre-weighed sets ready for mixing, available in different colours and finishes, allowing adaptation to various project requirements and application conditions. For further information or detailed technical data, please refer to the product technical data sheet.
Health and safety
Avoid contact with skin and eyes during handling. Use protective gloves and goggles and ensure adequate ventilation. In case of contact, wash thoroughly with water and consult the safety data sheet if necessary.
