MAXEPOX NOVOLAC
MAXEPOX NOVOLAC is a two-component phenolic epoxy coating, solvent-free, designed to provide high chemical resistance on concrete and steel surfaces.
MAXEPOX NOVOLAC forms a continuous, durable coating capable of withstanding aggressive chemical environments, both in direct exposure and immersion conditions. It is especially suitable for industrial areas where protection against hydrocarbons, solvents and chemical agents is required. MAXEPOX NOVOLAC stands out for its excellent adhesion, abrasion resistance and versatility, allowing smooth or anti-slip finishes depending on project requirements.
Applications
- Coating for tanks, bunds and chemical storage areas.
- Internal protection of concrete and steel tanks and pipelines.
- Coating for industrial plants, laboratories and manufacturing areas.
- Protection in water and waste treatment facilities.
Advantages
- Excellent resistance to aggressive chemical environments.
- Strong adhesion on concrete and steel substrates.
- High resistance to abrasion and wear.
- Solvent-free, suitable for poorly ventilated areas.
Application method
Mix components thoroughly until a homogeneous consistency is achieved and apply onto a clean, dry and properly prepared substrate using brush, roller or spray equipment, ensuring an even distribution of the product. For further information or detailed technical data, please consult the product technical data sheet.
Consumption
Consumption will depend on substrate condition, porosity and absorption, as well as the application method used, and may vary depending on specific site conditions. For further information or detailed technical data, please consult the product technical data sheet.
Packaging
MAXEPOX NOVOLAC is supplied in pre-measured sets ready for mixing, ensuring ease of application and correct proportioning of its components on site. For further information or detailed technical data, please consult the product technical data sheet.
Health and safety
Use protective gloves, goggles and suitable clothing during handling and application. Avoid contact with skin and eyes and ensure adequate ventilation when working with the product.
