MAXEPOX FLOOR -AC

MAXEPOX FLOOR -AC is a two-component, solvent-free, self-levelling epoxy coating designed for conductive flooring systems applied over MAXEPOX PRIMER -AC and copper bands connected to earth electrodes. Formulated to provide excellent electrical conductivity, mechanical strength and chemical resistance, MAXEPOX FLOOR -AC delivers a smooth, continuous surface ideal for high-performance industrial and commercial environments. Its bright, seamless finish offers easy cleaning, high abrasion resistance and uniform conductivity across large areas, making it suitable for electronic industries, operating rooms, clean rooms, warehouses and parking areas. Non-flammable, non-toxic and solvent-free, it is safe for applications with limited ventilation and ensures long-term durability under heavy use.

Applications

• Conductive self-levelling flooring for electronic and microchip manufacturing facilities.
• Clean rooms, operating theatres and laboratories requiring controlled conductivity.
• Warehouses, car parks and industrial areas with high mechanical and chemical demands.

Advantages

• High electrical conductivity and excellent adhesion on concrete or mortar substrates.
• Bright, uniform and easy-to-clean surface with outstanding resistance to abrasion.
• Solvent-free, non-flammable and non-toxic, suitable for confined or poorly ventilated spaces.
• Low viscosity for perfect self-levelling and even conductivity.

Mode of application

Mix components A and B completely using a low-speed drill until homogeneous. Apply MAXEPOX FLOOR -AC with a notched trowel at about 2.5 kg/m² and remove air bubbles using a spiked roller within 10 minutes of application.

Consumption

Approximate consumption: 2.5 kg/m² per coat with an average thickness between 1.3 and 1.5 mm, depending on substrate condition and application method.

Packaging

MAXEPOX FLOOR -AC is supplied in pre-weighed sets of 16.3 kg, consisting of 12.2 kg of Component A and 4.1 kg of Component B, available in light grey and other colours on request.

Precautions and safety

Use protective gloves, goggles and clothing during handling and application. Avoid contact with skin and eyes and ensure good ventilation in working areas.