Skip to content
LOGO-alta
  • About us
  • Solutions
    • Waterproofing
          • Swimming pools
            • Waterproofing mortars
            • Mineral finishing mortars
            • Fixing tile and tiles
            • Finishing coatings
            Drinking water tanks
            • Cement-based waterproofing membranes
            • Resin-based waterproofing membranes
            • Sealants for joints and cracks
            Basements and buried structures
            • Waterproofing mortars
            Moisture by capillarity
            • Injection treatments
            • Macroporous lining and finishing mortars
            Outside underground structures
            • Waterproofing coating
            • Draining membranes
            Water leak control
            • Plugging water leaks
            • Water reactive polyurethane resins
    • Roofing
          • Waterproofing membranes
            • Acrylic elastic membranes
            • Elastic polyurethane membranes
            • Elastic polyurea membranes
            Aliphatic protections
            • Aliphatic polyurethane protections
    • Facades and walls
          • Protection and decoration of masonry and concrete
            • Protection and decoration with cement-based RENDERING/RENDERING mortars
            • Protection and decoration with lime-based RENDERING/FINISHING mortars
            • Raising damp treatment
            • Thermal isolation
            • Protection and decoration with coatings based on Acrylic R.
            • Protection with hydrophobic impregnation
            • Protection with hydrophobic coating
            • Consolidation of supports
            • Anti-salts/efflorescence treatment
            • Anti-graffiti treatment
    • Structural repair
          • Reinforcement treatment
            • Passivators and anticorrosion protection
            • Migration corrosion inhibitors
            • Cathodic protection of steel
            Repair mortars
            • Thixotropic repair mortars
            • Fluid repair mortars
            Bonding agents
            • Bonding agents
            Crack injection
            • Crack injection system
    • Strengthering with carbon fiber
          • Reinforcement systems
            • Carbon fiber fabrics
            • Carbon fiber laminates
            • Rods and connectors
    • Additives
          • Classification by use
            • Setting accelerators
            • Anti-freeze admixtures
            • Silica fume
            • Waterproffing liquid admixtures
            • Air-entraining admixtures
            • Water reducers and plasticizers
            • Retraction reducers
            • Workability admixtures
            • Setting retarders
            • Curing agents
            • Demolding agents
            • Surface cleaners
            • Solvents and cleaners
            • Fibers
            • Bonding agents
            • Meshes and veils
            • Aggregates and fillers
    • Special applications
          • Anchoring and fixing
            • Materials with cement-based mortars
            • Metal materials with cement-based mortars
            • Materials on asphalt
            • Materials, round rounds and bolts with resin-based cartridges (chemical taco)
            Restoration of ornamental elements
            • Light weigth mortars
            Restoration of wooden elements
            • Repair mortars based on EPOXY resins
            Demolition of elements
            • Expansive mortar
            High temperature applications
            • Refractory mortars
    • Repair, screeds and levelling of pavements
          • Products and systems for patching
            • Patching of concrete pavements
            • Fast-setting patching mortars with urgent apening to traffic
            • Low temperature concrete patching (MMA)
            • Patching with asphalt mortar
            Screed systems
            • Application on metal surfaces
            • Stone carpet floors
            • Hydraulic binder for recreated mortars
            • Decorative mortar floors
            • Confortable floors
            Self-leveling products and systems
            • Rehabilitation and finishing of outdoor floors
            • Rehabilitation and finishing of indoor floors
            • Acustic isolated floors
            • Regularization of pavements with humidity
    • Protection and finishing of floors
          • Protection and decoration of pavements
            • Indoor PU coatings
            • Outdoor PU coatings
            • Indoor EPOXI coatings
            • EPOXI decorative floors
            • Food industry floors
            • Virucide and bacteria-free floor coatings
            • High performance flooring for industry
            • Fast opening to traffic coatings
            • Conductive floors
            • Sports floors
            • Surface hardener based on aggregates
            • Surface hardener based on transparent liquids
            • Stabilization and reduction of road dust
            • Sealing of porous asphalt pavements
            • Protection and finishing of metal surfaces
  • Documentation
  • News
  • Contact Us
  • Spanish
  • Italian
  • Maxrite -R THIX Saco 25 kg
    Quick View

    MAXRITE -R THIX

    MAXRITE®-R THIX is a one-component, shrinkage-compensated, fibre-reinforced and polymer-modified mortar with very high thixotropy, designed for structural concrete repair class R3, applicable manually or sprayed, for vertical sections up to 100 mm and overhead up to 40 mm without formwork.
  • Maxrite -S
    Quick View

    Maxrite S

    MAXRITE® – S is a normal setting, single component polymer-modified mortar, made up of special cements, selected aggregates and special resins, especially designed for the application over large surfaces. Its formulation allows it to be applied by dry or wet-process spraying, as well as manually by trowel, over substrates such as concrete, concrete blocks, mortars, stone, etc.

     

  • Maxrite -R
    Quick View

    Maxrite R

    MAXRITE® -R is a one-component, cement-based, polymer-modified, structural repair mortar with normal setting time. Its long open time and thixotropy allow the repair of new and old concrete in a simple way, without the need for using any form work, applied manually by trowel or mechanically by spray process. Meets Class R3 according to European Standard EN-1504-3.

  • Producto sin foto en la actualidad
    Quick View

    Maxrite -HT

    MAXRITE ® – HT is a single component, cementbased, silica fume and polymer-modified, fiberreinforced restoration mortar with corrosion inhibitors. It is specially designed for high performance structural concrete repair exposed to an aggressive environmental ambient and provides an additional protection of the steel reinforcements. Its long open time and excellent thixotropy allows the structural repair of concrete in vertical surfaces, with thick layers up to 10 cm thickness without form work. It can be applied manually or by spray.

  • Maxrite -F
    Quick View

    Maxrite -F

    MAXRITE ® -F is a one component thixotropic shrinkage-compensated mortar, with normal setting-time, made of special cements, selected aggregates, microsilica, polymers and reinforced with polypropylene fibers. It is specially designed for structural concrete repair, applied manually by troweling without the need for using any form work. Meets Class R4 according to European Standard EN-1504-3.

  • Maxrite 700
    Quick View

    Maxrite 700

    MAXRITE® 700 is an one-component, cement-  Restoration of structural concrete elements, based, silica fume-enhanced, polymer-modified, recovering original shape and function. EN fibre-reinforced restoration mortar with corrosion inhibitors. It is specially designed for high performance structural concrete repair exposed to an aggressive environmental ambient and provides an additional protection of the steel reinforcements.  Its long open time and thixotropy allow the repair of new and old concrete in a simple way, without the need for using any form work, applied manually or by mechanical means. Meets Class R4 according to European Standard EN-1504-3.

  • Maxrite 500
    Quick View

    Maxrite 500

    MAXRITE® 500 is a single component, cementbased, microsilica and polymer-modified, fiberreinforced restoration mortar with corrosion inhibitors. It is specially designed for high performance structural concrete repair exposed to an aggressive environmental ambient and provides an additional protection of the steel reinforcements.  Its quick-setting and thixotropy allow the repair of new and old concrete in a simple way, without the need for using any form  work.

    Meets Class R4 according to European Standard EN-1504-3.

  • Producto sin foto en la actualidad
    Quick View

    Maxrite

    A fast-setting polymer modified cementitious mortar designed for structural repair of new or old concrete.

    Spalled and broken concrete can be restored to its original condition without form work.

  • Placeholder
    Quick View

    Maxrest -R

    MAXREST® -R

  • Maxrest
    Quick View

    MAXREST

    MAXREST® is a one-component structural repair mortar based on special cements, additives and selected aggregates, providing a thixotropic, quick-setting and shrinkage-compensated product. It is suitable for structural repair of concrete elements, reinforcement passivation, cold joints patching and strengthening of structures, meeting EN 1504-3 Class R4 requirements.
DRIZORO ®
  • Calle Primavera, 50-52
    28850 Torrejón de Ardoz
    (Madrid)
  • Tel.: +34 916 76 66 76
Información
  • About us
  • Solutions
  • Documentation
  • News
  • Contact Us
  • About us
  • Solutions
  • Documentation
  • News
  • Contact Us
Legal
  • Legal warning
  • Cookies policy
  • Privacy Policy
  • Legal warning
  • Cookies policy
  • Privacy Policy
Síguenos
Newsletter

Si quieres recibir más información de Drizoro, suscríbete a nuestra newsletter.

  • DRIZORO ® - Todos los derechos reservados